Mosctl
From MosixWiki
MOSCTL(M1) MOSIX Commands MOSCTL(M1)
NAME
MOSCTL - Miscellaneous MOSIX functions
SYNOPSIS
mosctl stay
mosctl nostay
mosctl lstay
mosctl nolstay
mosctl block
mosctl noblock
mosctl logmap
mosctl nologmap
mosctl expel
mosctl bring
mosctl shutdown
mosctl isolate
mosctl rejoin [{maxguests}]
mosctl gridguests [{maxguests}]
mosctl opengrid [{maxguests}]
mosctl closegrid
mosctl cngpri {partner} {newpri} [{partner2} {newpri2}]...,
mosctl whois [{node_number}|IP-address|hostname]
mosctl status [{node_number}|IP-address|hostname]
mosctl localstatus
mosctl rstatus [{node_number}|IP-address|hostname]
DESCRIPTION
Most Mosctl functions are for MOSIX administration, available only to the
Super-User, except the whois, status and rstatus functions which provide
information to all users.
mosctl stay prevents processes from migrating away automatically: mosctl
nostay cancels this state.
mosctl lstay prevents local processes from migrating away automatically,
but still allows guest processes to leave: mosctl nolstay cancels this
state.
mosctl block prevents guest processes from moving in: mosctl noblock can-
cels this state.
mosctl logmap tells the kernel to log the MOSIX map of nodes to the con-
sole (and/or the Linux kernel-logging facility) whenever it changes (this
is the default). mosctl nologmap stops logging such changes.
mosctl expel expels all guest processes. It does not return until all
guest processes are moved away (it can be interrupted, in which case
there is no guarantee that all guest processes were expelled).
mosctl bring brings back all processes whose home-node is here. It does
not return until all these processes arrive back (it can be interrupted,
in which case there is no guarantee that all the processes arrived back).
mosctl shutdown shuts down MOSIX. All guest processes are expelled and
all processes whose home-node is here are brought back, then the MOSIX
configuration is turned off.
mosctl isolate disconnects the cluster from the grid, bringing back all
migrated processes whose home-node is in the disconnecting cluster and
sending away all guest processes from other clusters. To actually dis-
connect a cluster, this command must be issued on all the nodes of that
cluster.
mosctl rejoin cancels the effect of mosctl isolate: an optional argument
sets the number of guest processes that are allowed to move to this node
or run here from outside the local cluster. When this argument is miss-
ing, no guest processes from outside the cluster will be accepted.
mosctl gridguests prints the maximum number of guests that are allowed to
migrate to this node from other clusters. mosctl gridguests arg, with a
numeric argument arg, sets that maximum.
mosctl opengrid sets the maximum number of guest processess from outside
the local cluster to its argument. If no further argument is provided,
that value is taken from /etc/mosix/maxguests and in the absence of that
file, it is set to 10. mosctl closegrid sets that maximum to 0 - pre-
venting processes from other clusters to run on this node.
mosctl cngpri modifies the priority of one or more grid-partners in
/etc/mosix/partners (See mosix(7)). While it is also possible to simply
edit the files in /etc/mosix/partners, using mosctl cngpri is easier and
the changes take effect immediately, whereas when editing those files
manually, the changes may take up to 20 seconds.
mosctl whois, depending on its argument, converts host-names and IP
addresses to node numbers or vice-versa.
mosctl status outputs useful and user-friendly information about a given
node. When the last argument is omitted, the information is about the
local node.
mosctl localstatus is like status, but adds more information that is only
available locally.
mosctl rstatus output raw information about a given node. When the last
argument is omitted, the information is about the local node. This
information consists of 11 integers:
1. status: a bit-map, where bits have the following meaning:
1 The node is currently part of our MOSIX configuration.
2 Information is available about the node.
4 The node is in "stay" mode (see above).
8 The node is in "lstay" mode (see above).
16 The node is in "block" mode (see above).
64 The node may accept processes from here.
Reasons for this bit to NOT be set include:
* We do not appear in that node's map.
* That node is configured to block migration of processes
from us.
* Our configuration does not allow sending processes to that
node.
* That node is currently running higher-priority MOSIX pro-
cesses.
* That node is currently running MOSIX processes with the
same priority as our processes, but is not in our cluster
and already reached its maximum number of allowed guest-
processes.
* That node is blocked.
512 The information is not too old.
1024 The node prefers processes from here over its current guests.
2048 The node is a 64-bit computer.
8192 The node has a correct MOSIX kernel.
2. load: a value of 100 represents a standard load unit.
3. availability: The lower the value the more available that node is:
in the extremes, 65535 means that the node is available to all while
0 means that generally it is only available for processes from its
own cluster.
4. speed: a value of 10000 represents a standard processor (Pentium-IV
at 3GHz).
5. ncpus: number of processors.
6. frozen: number of frozen processes.
7. utilizability: a percentage - less than 100% means that the node is
under-utilized due to swapping activity.
8. available memory: in pages.
9. total memory: in pages.
10. free swap-space: in 0.1GB units.
11. total seap-space in 0.1GB units.
12. privileged memory: in pages - pages that are currently taken by less
privileged guests, but could be used by clusters of higher privilege
(including this node when "1024" is included in the status above).
13. number of processes: only MOSIX processes are counted and this count
could differ from the load because it includes inactive processes.
SEE ALSO
mosix(7).
MOSIX May 2006 MOSIX
